Dear Customer
Welcome to the Latchwork Live Demo Environment
A realistic preview of your Latchwork system
This demo uses synthetic data. The locker workflows and management controls shown here reflect the system you will receive. Cabinet hardware, door movement and face recognition are simulated in the browser.
Explore how a Latchwork locker solution works in practice. Follow realistic user journeys and see operational rules and administrator controls working together across the locker touchscreen and management console.
To begin, choose the demo scenario that best matches your use case, enter the supplied password and select Open demo. Inside an available scenario, follow the guided tour and move between the locker touchscreen and management console to see how each action is handled.
- Choose the scenario for your use case
- Explore the touchscreen and console
- Simulated data—nothing is submitted
What you are looking at
Two sides of one system. Whatever happens at a cabinet appears in the console within a second, and whatever the office changes reaches every cabinet just as quickly.
At the locker
Each 80-door cabinet has a 7-inch screen. In assigned mode, students select their locker and enter its PIN. In temporary mode, users choose an available locker to store an item, then select it again to collect.
In the school console
The office chooses assigned or temporary use before a cabinet first opens. Each cabinet can use a different mode, while any one cabinet runs only one mode at a time.
What is simulated
The cabinet, the school and the students are samples, and nothing here talks to a real locker. On site, the same console runs your cabinets with your locations, your hours and your class lists.
How cabinet modes are set
Mode is configured per cabinet, not across the whole school. The guided tour begins with first setup and later shows the safe changeover to temporary use.
- 1
Choose on first setup
A new cabinet stays unavailable until an administrator selects Assigned or Temporary mode. The cabinet screen then shows the matching user flow.
- 2
Configure cabinets independently
One school can keep assigned lockers in a classroom block and temporary lockers near reception. Each cabinet has one clearly shown operating mode.
- 3
Empty before changing mode
To switch an existing cabinet, staff first remove every item and close every door. Confirmation then clears that cabinet’s assignments, prepared PINs and temporary sessions before the new mode starts.
Rules for assigned school lockers
Phones go in before lessons and come out after them. The rules that make that work are set once, in the console, and every cabinet follows them.
Choose locker, then enter PIN
In assigned mode, the administrator prepares a locker and the system issues an initial PIN. At first use, the student selects the locker, enters that PIN and creates a new one.
Latecomers can still hand in
A student who arrives after drop-off can open their locker once to put their phone in. After that it stays locked until collection.
Staff can always open a door
From the console, or at the screen with a staff PIN, at any hour. Each opening is logged under the person who made it.
A record of every opening
Who opened which locker, when and how, including refused PINs. It settles the question of a missing phone, and it exports.
What you are looking at
A rewards locker for a mall, an airline, a bank or any programme with members and points. Whatever happens at the locker appears in the console within a second, and whatever your team changes reaches the screen as quickly.
At the locker
A touchscreen and QR scanner in the centre column of a 24-door bank. Members present the QR in your programme’s app, see their balance and choose a reward, and the door holding it opens.
In the console
Marketing and Customer Service set each reward’s points, who can redeem it and how often, issue giveaway codes, restock doors and see every redemption as it happens.
What is simulated
The mall, its members and the rewards are samples, and the link to the loyalty programme is simulated in your browser. Nothing here opens a real locker or moves real points.
Two ways to redeem, and nothing to pay
Members spend points at the screen, or present a code they were given. Either way the right door opens and the redemption is on record.
- 1
Points at the locker
Members sign in with the member QR in your app. The locker reads their balance from your loyalty programme and posts the deduction back as the door opens.
- 2
A single-use reward QR
For giveaways and gift-with-purchase, Customer Service issues a code, or your app sends one. Scanning it opens that reward’s door once, with no sign-in and no points.
- 3
Nothing to pay
There is no card reader and no cash at the locker. It hands over rewards your members have already earned or been given, and records each one.
What you are looking at
A parcel locker open to every courier and every marketplace, for a condominium or any building with residents. Whatever happens at the locker reaches the resident’s phone and the console within a second.
At the locker
A touchscreen, a barcode scanner and a label camera in the centre column of a 24-door bank. A courier from any company scans a parcel, the locker works out who it is for, and a door of the size they choose opens.
On the resident’s phone
When the door shuts, the resident gets a WhatsApp message, or an SMS where there is no WhatsApp, with one code and its QR. No app to install, and the same code opens every door holding their parcels.
What is simulated
The condominium, its residents, the couriers and the parcels are samples. Courier data, label reading and the messages are simulated in your browser: nothing is sent, and no real locker opens.
How every parcel finds its resident
Strongest first. The locker uses the first that works and records which one it used, so the office can see how every parcel was matched.
- 1
Courier data
Where a courier shares its delivery data with the platform, the tracking number alone gives the recipient’s name, block and unit.
- 2
The label, read by the camera
Every other parcel has its recipient printed on it. The camera reads the name, block, unit, postal code and the phone digits marketplaces print, in English or Chinese.
- 3
The courier types the unit
When a label is smudged or torn, the screen asks for the unit. The name and phone digits are still checked against the residents registered there.
- 4
The office, when nothing matches
The parcel still goes into a door, held for review, and the console suggests who it may be for. Nothing is guessed. A parcel for another building is refused at the screen.
Registration and consent, built in
A parcel is only ever matched to a resident who registered and agreed to be contacted. The guided tour approves a registration that was waiting for the office.
Residents register themselves
From a QR poster in the lift lobby: name, unit, a mobile number checked with a one-time code, WhatsApp or SMS, and the other names their parcels arrive under, such as an English or a Chinese name. The office approves each one against its own records.
Consent on record
Each registration records the resident’s consent, the date and the version of the notice they agreed to. They can stop at any time by replying STOP or asking the office, and the console shows mobile numbers masked.
Households and helpers
A parcel addressed to a registered resident goes to that resident. One addressed to the unit, or to a name nobody there registered, goes to everyone registered at the unit, including a helper if the household added one.
Nothing given away at the screen
The screen shows a courier nothing beyond what is already on the label, and greets a resident by name only once their code has opened a door. Label photos are deleted a set number of days after collection.
Rules that keep the bank free
A parcel bank fills up when parcels sit in it. These are set once in the console and applied to every parcel.
One code for everything waiting
A resident has one code at a time, and it opens every door holding their parcels. A second parcel for the same person can share the door their first one is waiting in.
Reminders, then the office
Reminders go on a schedule you set, outside quiet hours. A parcel left past the limit is flagged, moved to the management office from the console, and the resident is told where it is.
A receipt on collection
The resident is told the moment their parcel is collected, so a code used by someone else is noticed at once.
Every parcel on record
Deliveries and how each parcel was matched, messages and whether they were read, collections, refusals and doors left open, each with the door, the unit and the time.
Rules that keep a promotion fair
Set once in the console and applied at every tap. The guided tour shows each one working.
One reward per door
A door opens for one redemption, so each holds one item and stock is simply the doors loaded. Three door sizes take anything from a voucher to a gift box.
Points only as the door opens
A door that fails to open costs the member nothing. If an item is missing or damaged, the member reports it on the screen and your team refunds it from the console.
Terms for each reward
Set the points, the tiers that can redeem it and how often one member may. Pause a reward without emptying its doors, and cap redemptions per member per day.
Every scan on record
Redemptions, refusals, reused or expired codes, restocks and doors left open, each with the member, the code and the door. Low stock is flagged before a member finds an empty door.