Skip to content
Cost & buying

What Should a Locker Quotation Include in Singapore?

Compare Singapore locker quotations on equal terms: drawings, locks, freight, installation, exclusions, lead time and the details that prevent later variations.

By Latchwork Published 5 min read

Illustrated rows of lockers in different compartment sizes and configurations for comparing a project quotation
A quotation should describe the bank that will be delivered, not merely show a generic locker photograph.

A useful locker quotation lets a facilities manager, contractor or MCST compare the final installed result. It does not hide behind one attractive price per door while leaving freight, locks, access and installation to be discovered after award.

The quickest test is simple: could another person take the quotation and its drawing to the finished room, then verify that every promised cabinet, lock, fitting and service is present? If not, the scope is not complete enough to compare.

Start with the cabinet and compartment schedule

The quotation should name the material, overall bank dimensions, number of compartments and clear internal size. It should say whether the construction is welded or knock-down, how the bank stands above the floor, and which internal fittings are included.

Compartment count matters more than cabinet count. A bank with 24 doors contains far more hinges, locks and fabrication than a four-door bank with similar outside dimensions. “Three locker cabinets” therefore describes almost nothing about value.

Ask for a dimensioned elevation showing:

  • overall width, depth and height;
  • columns, rows and compartment splits;
  • plinth, legs or levelling arrangement;
  • shelf, hanging rail, hook or charging provisions;
  • door numbering and opening direction; and
  • the finish reference.

This is also where a ref image must be treated correctly. The illustration above helps compare configurations, but it is not a specification. The approved drawing is what decides the manufactured dimensions and door count.

Put the exact lock on every door in the price

“Digital locker” is too vague for a quotation. A keyed cam lock, standalone battery keypad and connected electronic latch solve different problems and sit at different price points.

Lock typeInfrastructureRecurring chargeQuotation should state
Keyed camNoneNoneKey quantity, master-keying and replacement basis
Battery keypadBatteries in each lockNoneDay-use or assigned mode, override and spare locks
Connected accessOne 3-pin socket per bankAnnual platform fee per bankController, access methods, connectivity and subscription

The lock schedule should also state the mechanical override. Electronics and batteries eventually fail; a system that can trap a wallet, laptop or passport without a controlled way in is incomplete.

Use the lock comparison to decide which capability the room actually needs before comparing prices. Paying for connected access makes sense where automatic release, central provisioning, billing or an access log matters. A stationery cupboard does not need those features.

Compare the delivered-and-installed total

A quotation should make clear whether the price includes manufacture, sea freight, local delivery and installation in the actual room. “Delivery” to a loading bay is not the same as moving welded banks through a small lift into a basement changing room.

Latchwork’s normal project scope includes the site survey, specification, dimensioned layout drawing, manufacture, sea freight, delivery, installation, levelling, normal floor or wall fixing, access hardware fitting, door numbering and warranty. Where connected access is selected, platform setup, staff training and printed user instructions are included as well.

Access conditions must be recorded before fabrication. The supplier needs door widths, lift dimensions, stair turns, loading restrictions and permitted working hours. If a welded bank cannot reach the room, the answer may be knock-down construction assembled on site. Discovering that on delivery day creates delay and a variation that a proper survey should have prevented.

Exclusions belong beside the price, not in a later email

Some work genuinely sits outside a locker supplier’s scope. The problem is not the exclusion; it is learning about it after the order.

A clear quotation identifies items such as:

  • electrical work where no socket is within reach;
  • floor rectification or screeding;
  • wall making-good and formed recesses;
  • special lift or hoist hire;
  • out-of-hours installation;
  • permits or site-specific duties; and
  • alterations requested after fabrication has started.

Connected access needs one standard 3-pin socket per bank and can use 4G, so it does not normally require structured network cabling. Keyed and battery keypad lockers need no electrical provision at all. These facts should appear in the scope so the main contractor can assign provisions by others before the programme closes in.

Separate one-off cost from recurring cost

The cabinet, lock hardware, freight and installation are capital costs. A standalone keypad lock has batteries to replace but no subscription. Connected access has an annual platform subscription per bank for connectivity, dashboard functions, updates and support.

Do not compare only year-one totals. Ask each supplier to identify recurring charges, their billing basis and what happens if the service ends. If one proposal prices a subscription per compartment and another per bank, the difference grows sharply on a high-density installation.

The public pricing estimator is useful for an early budget, but it deliberately returns a range. The site survey, access route, final finish and approved compartment schedule are what turn that range into a figure a supplier can hold.

Programme begins with approval, not with the first enquiry

Latchwork normally allows six to ten weeks from confirmed order and approved shop drawings for standard specifications, including sea freight and installation. The sequence is typically drawings and material submission, manufacture, freight and customs, then delivery and installation.

Drawing approval is part of the programme. A quotation should state what starts the clock, how long the price remains valid and which customer decisions are required before manufacture. A promised delivery date based on an unapproved concept drawing is not yet a programme.

For a school term start, clubhouse reopening or contractual handover, work backwards from the immovable date. Allow time for drawing comments, finish samples and site access approval rather than treating them as activities that can happen after the cabinets ship.

Use one comparison sheet for every bidder

Before awarding the package, place each proposal into the same checklist:

  1. Cabinet material, dimensions and compartment count.
  2. Lock type, override, master-keying and access mode.
  3. Finish, numbering, accessories and internal fittings.
  4. Freight, delivery route, installation and fixing.
  5. Electrical and builder’s-work provisions.
  6. Drawings, samples, warranty and training.
  7. Lead time, approval milestones and payment terms.
  8. One-off total, recurring fees and explicit exclusions.

This comparison often explains why the lowest cabinet subtotal is not the lowest completed project. It also gives the successful supplier a clean scope to deliver against.

Send Latchwork the room dimensions, expected compartment count, stored items, preferred lock and target date through the quotation form. A photo of the access route and wall is often more useful than another page of generic specification: it lets the quotation price the job that will actually be installed.

Where this applies

Quick answer: What should a complete locker quotation include in Singapore?

A complete Singapore locker quotation should identify the cabinet material and compartment layout, lock on every door, finish, accessories, delivery route, installation and fixing method, drawings, warranty, programme and every exclusion. It should also separate one-off hardware from recurring platform fees. A low unit price is not comparable if freight, installation, electrical work or difficult access appears later as a variation, so compare the delivered and installed scope rather than the cabinet subtotal.

Typical programme
6–10 weeks
Connected access
One socket per bank
Keypad recurring fee
None
Price basis
Delivered and installed

Questions people also ask

Should a locker quotation include delivery and installation?

A locker quotation should state whether sea freight, delivery to the actual room, levelling, normal fixing, lock commissioning and door numbering are included. A cabinet-only price is not comparable with a delivered-and-installed package unless those missing items are priced separately.

What drawings should come with a locker quotation?

A project locker quotation should be supported by a dimensioned bank elevation showing overall size, compartment splits, plinth or legs, door numbering, lock schedule and finish reference. Final manufacture should begin only after the responsible project party approves that drawing.

Which locker costs are commonly excluded?

Common exclusions are electrical work where no socket is available, floor rectification, screeding, wall making-good, formed recesses, special lift or hoist hire, out-of-hours working and changes requested after fabrication has started. A complete quotation states these before an order is placed.

Does a keypad locker have an annual fee?

A standalone battery keypad locker has no platform subscription or connectivity fee. Its ongoing cost is replacement batteries and eventual spare locks. Connected access is different: it adds controller hardware and an annual platform subscription per bank.

How long should a Singapore locker project allow?

Latchwork normally plans six to ten weeks from confirmed order and approved shop drawings for standard specifications, including manufacture, sea freight and installation. Custom colours, sizes, difficult access or slow drawing approval can extend the programme.

Tell us what needs storing

Send the site, roughly how many lockers you are thinking of, and what goes in them. We will come back with a specification and an indicative price, and arrange a site survey if it looks like a fit. Enquiries from managing agents, club management, facilities teams, architects and interior contractors are all welcome.

GX TECH PTE. LTD. (UEN 202503838W) · trading as Latchwork